Crawler Crane

600 Ton

The crawler crane TEREX CC 2800 – 1 has a maximum lifting capacity of 660 tons. The maximum boom and jib lengths are 452.8 feet and 118 feet, respectively.

The car body and crawler side frames are built of high strength fine grain structural steel that is bending and torsion resistant. The crawlers' track shoes, idlers, and drive sockets are made of high-strength cast steel that has been heat treated. On each side of the crawlers, there are 15 rollers with hardened rolling surfaces and an automatic centralized lubrication system. A triple-row roller bearing slew-ring connects the superstructure frame to the carrier frame, which is likewise torsion resistant and built of high strength fine grain steel.

The engine is a DaimlerChrysler OM 502 LA from DaimlerChrysler. This 530-horsepower diesel engine is Tier III certified. Five variable displacement axial piston pumps, a silencer with a spark arrestor, and gear pumps make up the pump distribution gearbox.

The TEREX CC 2800 – 1's tracks are driven by two hydraulic motors, each with closed planetary gear reduction units operating in oil baths. Both tracks have hydraulically released holding brakes that are spring-applied. The gear units were designed to be tiny enough to fit inside the crawler's breadth. The four hydraulic assembly jacking cylinders are located on the car body and fold to a width of 9.8 feet for easy crawler installation. Please contact one of Bigge's sales representatives for additional information about the TEREX CC 2800 – 1.

Manufacturer: Terex
Model: Demag CC 2800 - 1
Max Capacity: 660 US Tons
Boom: 79 - 453 FT
Luffing jib: Available
SICHO Owns: 1 Unit

300 Ton

The Demag CC 1800 is a powerful workhorse that is more than capable of handling huge projects. It has a max lift capacity of 365 tons (330 t), 275 ft. (84 m) main boom max length, and a 118 ft. (36 m) max jib length.

It comes standard with a 3-section carrier which includes the car body and two crawler side frames that are pin-connected hydraulically to make it easier to remove the crawlers for transportation.

The side frames and crawler shoes are made out of fine-grain structural steel, with 14 track roller per side frame and a centralized lubrication system. It’s all powered by a water-cooled Mercedes Benz type OM 441 LA diesel engine that puts out up to 340 (250 kW). The steel cab of the Demag CC 1800 is a comfortable place to be. It comes with a self-contained heater, instrumentation and controls for crane movement/travel, and it can be tilted back for improved view.

As impressive as the 1800’s capabilities are, they can be stretched further by the utilization of optional features. These include: track shoes, Hoist II, and an additional counterweight.

Manufacturer: Terex
Model: Demag CC 1800
Max Capacity: 365 US Tons
Boom: 275 FT
SICHO Owns: 1 Unit

250 Ton

The CKE 2500 crawler crane from KOBELCO uses new technologies to raise performance to new heights. New winches with greater line pull can handle the toughest ensure ultra-smooth operation and longer component service life.

The Kobelco CKE 2500- II Crawler Crane has a maximum capacity of 250 tons and a maximum boom length of 300 feet, with a jib extension of an additional 50 feet. Like all Kobelco cranes, it is designed from the ground up for reliable operation, convenient maintenance and easy transport. The CK2500 is fabricated from high tensile steel and optimized using CAD technology for unmatched rigidity. Fully hydraulic, it excels in all crawler crane operations.

Kobelco currently makes the CK2500-II which improves on the prior model with new features and upgrades.

Manufacturer: Kobelco
Model: CKE 2500 - II
Max Capacity: 250 M Tons
Boom: 41-165 FT
SICHO Owns: 1 Unit

250 Ton

The Kobelco CK2500 Crawler Crane has a maximum capacity of 250 tons and a maximum boom length of 300 feet, with a jib extension of an additional 50 feet. Like all Kobelco cranes, it is designed from the ground up for reliable operation, convenient maintenance and easy transport. The CK2500 is fabricated from high tensile steel and optimized using CAD technology for unmatched rigidity. Fully hydraulic, it excels in all crawler crane operations.

Kobelco currently makes the CK2500-II which improves on the prior model with new features and upgrades.

Manufacturer: Kobelco
Model: CK 2500
Max Capacity: 250 M Tons
Boom: 41-165 FT
SICHO Owns: 1 Unit

150 Ton

The Kobelco CKE1350 Crawler Crane has a maximum lifting capacity of 150 tons, a maximum boom length of 76.2 meters, and a jib extension of an additional 12 meters. It also has maximum lifting capacities of 10.6 meters for long booms, 82.3 meters for luffing booms, 47.9 meters for crawler booms, and 4.5 meters for crawler booms with a maximum length of 76.2 meters.

The CKE1350 comes with an upper and lower machine, a counterweight weighing 53.0 tons and 10.0 tons, a basic boom, a hook, and other accessories. The base machine comes with a trans-lifter, a hook weighing 70 tons, main and auxiliary winches (non-free fall), including wire rope, and a self-removal device.

The CKE1350, which Kobelco currently produces, enhances the previous model with new capabilities.

Manufacturer: Kobelco
Model: CKL 1350i
Max Capacity: 150 M Tons
Boom:49 – 250 FT
SICHO Owns: 1 Unit

100 Ton

The "CKL1000i," a crawler crane with a 100-ton capacity that Kobelco Cranes is introducing for the Indian market. At the Excon trade show in Bangalore, India, the first Indian model, the CKL1000i, will be displayed. On November 23–27, 2011, Excon is held over five days. To allow visitors to see the broad range of Kobelco Group products, Kobelco Cranes and Kobelco Construction Machinery Co., Ltd. are collaborating on Excon. In the Indian state of Andhra Pradesh, Kobelco is building its first manufacturing facility abroad to produce crawler cranes. The plant will start running on a trial basis at the end of November, and at full capacity beginning early in 2019. At the new facility, Kobelco intends to produce the CKL1000i.

Manufacturer: Kobelco
Model:CKL 1000i
Max Capacity: 100 M Tons
Boom:40 FT
SICHO Owns: 1 Unit